From Bioblast
 |
Amperometric,Amp |
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
Description
After selection of the Amperometric, Amp channel in the O2k configuration, an Amperometric, Amp tab will appear in the O2k control [F7] window. Set the desired light intensity (0-1600) in the field ´Fluo intensity´ and the desired amplification of the signal (1-1000) in the field ´Gain for Fluo sensor´in the Amperometric, Amp window followed by a left-click Send to O2k. Switching off the illumination before each fluorometric measurement is routinely required.
Abbreviation: F7
MitoPedia O2k and high-resolution respirometry:
DatLab
