Difference between revisions of "O2k-Titration Set"
From Bioblast
| Line 14: | Line 14: | ||
:2 [[Microsyringe\50 mm3 51/0.15 mm]] 50 mm<sup>3</sup> | :2 [[Microsyringe\50 mm3 51/0.15 mm]] 50 mm<sup>3</sup> | ||
:3 [[Plunger\10 mm3]] for 10 mm<sup>3</sup> syringe | :3 [[Plunger\10 mm3]] for 10 mm<sup>3</sup> syringe | ||
== Treatment of the syringes == | |||
* for long time storage of the syringes fill them with 100 % ethanol and store them in 15 ml Falcons filled with 100 % ethanol that the needle and the beginning of the glass syringe are covered with liquid | |||
* before using the syringes always rinse them outside with the solvent (water or ethanol) of the chemical | |||
* before using the syringes wash them 3 times with the solvent - be aware that the whole syringe is filled till the end of the plunger! | |||
* between titration: rinse the outside with water (to get rid of the respiration medium) and if necessary with ethanol depending on the solvent of the chemical | |||
Revision as of 17:39, 11 February 2013
O2k-Titration Set
| Description | The Titration Set consists of 6x 10 µl, 6x 25 µl, and 2x 50 µl Hamilton glass syringes, and 3 spare plungers for the 10 µl syringes. It is a basic HRR-Accessory included in the O2k-Core Unit. |
|---|---|
| Product ID | 20820-01 |
| Type | O2k, O2k-Module, O2k-Core, Microsyringe, Catalogue |
| Link | MiPNet09.12 O2k-Titrations |
| Image |  |
The Titration Set consists of
- 6 Microsyringe\10 mm3 51/0.13 mm 10 mm3
- 6 Microsyringe\25 mm3 51/0.15 mm 25 mm3
- 2 Microsyringe\50 mm3 51/0.15 mm 50 mm3
- 3 Plunger\10 mm3 for 10 mm3 syringe
Treatment of the syringes
- for long time storage of the syringes fill them with 100 % ethanol and store them in 15 ml Falcons filled with 100 % ethanol that the needle and the beginning of the glass syringe are covered with liquid
- before using the syringes always rinse them outside with the solvent (water or ethanol) of the chemical
- before using the syringes wash them 3 times with the solvent - be aware that the whole syringe is filled till the end of the plunger!
- between titration: rinse the outside with water (to get rid of the respiration medium) and if necessary with ethanol depending on the solvent of the chemical
