Difference between revisions of "Sensitivity"

Revision as of 09:15, 14 August 2016

high-resolution terminology - matching measurements at high-resolution

Sensitivity

Description

Sensitivity refers to the response obtained for a given amount of analyte and is often denoted by two factors: the limit of detection and the limit of quantification.

Reference: Paul WL (1991) USP perspectives on analytical methods evaluation. Pharm. Technol. 15: 130-141.

MitoPedia concepts: "MitoFit Quality Control System" is not in the list (MiP concept, Respiratory state, Respiratory control ratio, SUIT concept, SUIT protocol, SUIT A, SUIT B, SUIT C, SUIT state, Recommended, ...) of allowed values for the "MitoPedia concept" property. MitoFit Quality Control System"MitoFit Quality Control System" is not in the list (Enzyme, Medium, Inhibitor, Substrate and metabolite, Uncoupler, Sample preparation, Permeabilization agent, EAGLE, MitoGlobal Organizations, MitoGlobal Centres, ...) of allowed values for the "MitoPedia topic" property.

MitoPedia methods: Respirometry, Fluorometry, Spectrophotometry

MitoPedia O2k and high-resolution respirometry: DatLab

Contributed by Harrison DK, 2011-11-25

DatLab

The sensitivity is calculated in the pull-down menue 'Calibration'. - MiPNet19.18D O2k-calibration

Revision as of 14:35, 8 February 2016 (view source) Plattner Christina (talk \| contribs) ← Older edit		Revision as of 09:15, 14 August 2016 (view source) Gnaiger Erich (talk \| contribs) Newer edit →
Line 16:		Line 16:

	== DatLab ==		== DatLab ==
	The sensitivity is calculated in the pull-down menue 'Calibration'. - [[MiPNet19.18D O2k-~~Calibration~~]]		The sensitivity is calculated in the pull-down menue 'Calibration'. - [[MiPNet19.18D O2k-calibration]]