Talk:O2k-Open Support alert
From Bioblast
Revision as of 17:06, 9 March 2020 by Antunes Diana (talk | contribs)
- Do you perform the leaky chamber test after chamber assembly?
- After chamber reassembly you might experience a small leaky chamber only identified by a leaky chamber test- »Leaky chamber test«
- Do you perform the leaky chamber test after chamber assembly?
- Do you change the slope smoothing to 20 while running experiments with biological sample?
- While running your experiment, especially during uncoupler titrations, it is important to decrease the slope smoothing in order to have a faster visualization of the titrations effect on respiration. - »Slope smoothing«
- Do you change the slope smoothing to 20 while running experiments with biological sample?
- Do you know that you can use the Titration-Injection microPump (TIP2k) to perform an instrumental O2 background on the O2k-sV-Module?
- By adjusting the dithionite concentration to 2.5 mM, the instrumental O2 background can be performed with specific settings for the O2k-sV-Module. - »O2k-sV-Module«
- Do you know how a switch components approach can address your faulty specifications even after countless quality control tests?
- Do not desperate if specifications given in the O2k-Manuals are not obtained. See how to perform a experimental savior troubleshooting.-»Switch components approach«
- Do you know that you can use the Titration-Injection microPump (TIP2k) to perform an instrumental O2 background on the O2k-sV-Module?