Talk:Oroboros Ecosystem Agenda 2020
From Bioblast
Revision as of 10:20, 20 March 2020 by Cecatto Cristiane (talk | contribs)
For discussion
Here we discuss suggestions for the Oroboros Ecosystem Agenda 2020
- As part of the H2020 SME NextGen-O2k project we are developing a PhotoBiology module that will allow to study the effect of different light intensities on O2 consumption and production: »PhotoBiology«
Do you perform a stirrer test during oxygen calibration?
- In DatLab 7.4, instrumental DL-Protocols guide you automatically towards performing the stirrer test in the process of air calibration. It shows immediately, if your OroboPOS has a satisfactory response time. Further details in MitoPedia: »Oxygen calibration - DatLab
-
Is the noise of the ‘O2 slope neg’ acceptable?
- If you are not certain that the noise of the ‘O2 slope neg’ is within a suitable range or you want to confirm that your experimental data will not be affected, see further details: MiPNet06.03 POS-calibration-SOP
Not sure if I choose the right O2k-support picture:
- Why the oxygen levels are different for the chambers?
- What to do if the oxygen concentration is not 'normal' or is not the same for both chambers: - » Oxygen calibration - troubleshooting«
- Unstable flux in OXPHOS
- Some substrates can't support respiration alone - » Pyruvate - troubleshooting«
