From Bioblast
Description
[[Description::The O2 sensor test is an important component of the MitoFit Quality Control System. The OroboPOS sensor test is described in detail in MiPNet06.03 POS-calibration-SOP, is performed after switching on the O2k, and is required as a basis of technical service of the instrument.]]
Abbreviation: POS test
Reference: [[Info::MiPNet06.03 POS-calibration-SOP]]
MitoPedia concepts:
MitoFit Quality Control System
MitoPedia O2k and high-resolution respirometry:
O2k hardware,
DatLab
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
- Β» 1. Service and preparation
- Β» 1a. O2k-Manual: POS-service
- Β» 1b. O2k-Protocols SOP: O2k-cleaning
- Β» 2. POS-calibration SOP
- Β» 2a. Stirrer test
- Β» 2b. O2k-Manual: O2k-calibration