Difference between revisions of "Stirrer-Bar\white PVDF\15x6 mm"
| Line 3: | Line 3: | ||
{{MitoPedia without banner | {{MitoPedia without banner | ||
|abbr= | |abbr= | ||
|description=[[Image:Stirrer bar PVDF.jpg|right|180px]]'''Stirrer-Bar\white [[PVDF]]\15x6 mm''', operated in the 2-mL [[O2k- | |description=[[Image:Stirrer bar PVDF.jpg|right|180px]]'''Stirrer-Bar\white [[PVDF]]\15x6 mm''', operated in the 2-mL [[O2k-chamber]] at constant stirring speed (standard is 750 rpm, or 12.5 Hz), to provide optimum mixing of the sample in the aqueous medium and ensure a stable signal of the polarographic oxygen sensor ([[OroboPOS]]) placed in a position of maximum current of the medium. | ||
Revision as of 12:02, 18 October 2020
 |
Stirrer-Bar\white PVDF\15x6 mm |
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
Description
Stirrer-Bar\white PVDF\15x6 mm, operated in the 2-mL O2k-chamber at constant stirring speed (standard is 750 rpm, or 12.5 Hz), to provide optimum mixing of the sample in the aqueous medium and ensure a stable signal of the polarographic oxygen sensor (OroboPOS) placed in a position of maximum current of the medium.
Two units of this item are standard components of the O2k-Assembly Kit (O2k-FluoRespirometer).
For dispatch of the O2k-FluoRespirometer, the Stirrer-Bars are shipped in the O2k-Service Box.
Reference: MiPNet06.01 O2k-Overview
Additional resources
- » A "jumping" stirring bar problem may be caused by small particles sticking to the glass chamber, not the stirring bar itself. » MiPNet19.03 O2k-cleaning and ISS.
MitoPedia O2k and high-resolution respirometry: O2k hardware, O2k-Open Support, O2k-Respirometry, O2k-FluoRespirometry
