Difference between revisions of "Volume-Calibration Ring"
From Bioblast
| Line 1: | Line 1: | ||
{{Product | {{Product | ||
|description='''Volume-Calibration Ring''' (A or B) PVDF for O2k-Stoppers (2-mL [[O2k- | |description='''Volume-Calibration Ring''' (A or B) PVDF for O2k-Stoppers (2-mL [[O2k-chamber]]), white; attached to the [[Stopper\black PEEK\conical Shaft\central Port |stoppers]]. | ||
|product id=2432A-01 or 2432B-01 | |product id=2432A-01 or 2432B-01 | ||
|product type=O2k, Stopper | |product type=O2k, Stopper | ||
| Line 10: | Line 10: | ||
== Technical support == | == Technical support == | ||
::: '''Volume calibration of the [[O2k- | ::: '''Volume calibration of the [[O2k-chamber]]''' | ||
::::* Loosen the stopper fixation rings (A) and (B) with the Allen key (OroboPOS-Service Kit). | ::::* Loosen the stopper fixation rings (A) and (B) with the Allen key (OroboPOS-Service Kit). | ||
::::* Follow the instructions in the O2k-Manual: [[MiPNet22.11 O2k-FluoRespirometer manual]] | ::::* Follow the instructions in the O2k-Manual: [[MiPNet22.11 O2k-FluoRespirometer manual]] | ||
::::* Tighten the screws of the fixation rings (A) and (B) gently with the Allen key to ensure that the calibration ring cannot be displaced. Tightening the screw with too much force may damage the thread of the calibration ring. Check for a sufficient fixation by trying to rotate the calibration ring. | ::::* Tighten the screws of the fixation rings (A) and (B) gently with the Allen key to ensure that the calibration ring cannot be displaced. Tightening the screw with too much force may damage the thread of the calibration ring. Check for a sufficient fixation by trying to rotate the calibration ring. | ||
Revision as of 12:04, 18 October 2020
Volume-Calibration Ring
| Description | Volume-Calibration Ring (A or B) PVDF for O2k-Stoppers (2-mL O2k-chamber), white; attached to the stoppers. |
|---|---|
| Product ID | 2432A-01 or 2432B-01 |
| Type | O2k, Stopper |
| Link | MiPNet22.11 O2k-FluoRespirometer manual |
| Image |  |
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
Technical support
- Volume calibration of the O2k-chamber
- Loosen the stopper fixation rings (A) and (B) with the Allen key (OroboPOS-Service Kit).
- Follow the instructions in the O2k-Manual: MiPNet22.11 O2k-FluoRespirometer manual
- Tighten the screws of the fixation rings (A) and (B) gently with the Allen key to ensure that the calibration ring cannot be displaced. Tightening the screw with too much force may damage the thread of the calibration ring. Check for a sufficient fixation by trying to rotate the calibration ring.
- Volume calibration of the O2k-chamber
